BLANKE LEVITO
BLANKE LEVITO is a three-piece tool set used to avoid high spots, especially when laying large format tiles and slabs. The starter set consists of 100 T-shaped pulling plates, 100 tension wedges, and a collet chuck which can be adjusted according to the tile thickness. The ideal clamping distance is determined by setting the tile thickness on the collet chuck. Using the collet chuck, the T-shaped pulling plates are pressed against the tile from below so that the tiles are aligned to the exact height on the upper side. The wedge fixes the position until the tile adhesive has hardened. After this, the upper part of the T-piece is removed at the breaking point. At the same time, this leg also acts as a spacer to create a uniform appearance.
BLANKE LEVITO T-SHAPED PULLING PLATES
FOR 5 – 15 mm THICK TILES AND SLABS
Height:
Tile thickness 15-25mm
|
Width:
Joint width 2mm
The BLANKE LEVITO T-ZUGPLATTE made of plastic is part of the three-piece BLANKE LEVITO tool set designed to prevent lippage, especially with large-format tiles and slabs. It is pressed from below against the underside of the tiles using the clamping pliers, aligning the tiles at the top to exactly the same height. After fixing with the BLANKE LEVITO KEIL (wedge) and the hardening of the tile adhesive, the T-piece of the pulling plate is separated at the predetermined breaking point. The arm also serves as a spacer for an even joint appearance. The BLANKE LEVITO T-ZUGPLATTE is suitable for tiles and slabs from 15-25mm thick and for a joint width from 2mm.
BLANKE LEVITO PLIERS
The BLANKE LEVITO ZANGE (pliers) is part of the BLANKE LEVITO tool set. By adjusting the tile thickness on the pliers, the optimal clamping path is predetermined. This ensures consistent clamping force when driving the wedges into the pulling plate.
BLANKE LEVITO DS ADAPTOR
Adapter for thin tiles
The BLANKE LEVITO DS-ADAPTER made of plastic is an additional component to the three-part BLANKE LEVITO toolset, specifically designed to prevent lippage, particularly with large-format tiles and slabs. This adapter is used to raise tile materials under 5mm in thickness, as the BLANKE LEVITO system is only applicable for material thicknesses starting from 5mm. It ensures a secure and level installation, compensating for the reduced thickness of the tiles and providing a stable base. This is particularly useful for aligning thin tiles with thicker adjacent tiles or other floor elements, maintaining a consistent and smooth surface finish.
BLANKE LEVITO STARTER-SET
INCL. 100 WEDGES, 100 T-SHAPED PULLING PLATES AND PLIERS
The BLANKE LEVITO STARTER SET is a three-piece tool set designed to prevent lippage, especially with large-format tiles and slabs. The starter set includes T-shaped pulling plates (100 pcs for joint width from 2 mm), wedge clamps (100 pcs), and an adjustable clamping pliers for the respective tile thickness. By operating the clamping pliers, the T-shaped pulling plate is pressed from below against the underside of the tiles, aligning the tiles at the top to exactly the same height. The inserted wedge fixes the position until the tile adhesive hardens. Afterward, the upper part of the T-piece is broken off at the predetermined breaking point. This arm also serves as a spacer for an even joint appearance.
BLANKE LEVITO WEDGES
The BLANKE LEVITO KEIL made of plastic is part of the BLANKE LEVITO tool set for preventing lippage, especially with large-format tiles and slabs. The leveling system serves to fix the T-shaped pulling plates of BLANKE LEVITO until the tile adhesive is fully cured.