BLANKE LEVITO SPIN
BLANKE LEVITO SPIN is an aid used to avoid high spots, especially when laying large format tiles and slabs. The screw system can be used without additional tools. The BLANKE LEVITO SPINCAPS and BLANKE LEVITO SPIN THREADED LUGS are required for the installation. The threaded lugs are available for different joint widths as required. They also serve as spacers for a uniformly wide joint pattern and can be used for material thicknesses of 3 – 20 mm. In combination with the threaded lugs, the spincaps make sure that all the tiles can be aligned on exactly the same level at the top edge. The cap fixes the position until the tile adhesive has hardened. The BLANKE LEVITO SPIN THREADED LUG is then separated at the defined breaking point. LEVITO SPINCAPS are reusable.
BLANKE LEVITO SPIN LEVEL SCREWS
For different joint widths
Color:
White
|
Selection:
6 buckets of 250 each
|
Width:
Joint width 1.0mm
The BLANKE LEVITO SPIN GEWINDELASCHE is part of the BLANKE LEVITO SPIN leveling system. It also acts as a spacer for uniform joint widths and is suitable for material thicknesses from 3 to 20 mm. The threaded lash provides a joint width of 1.0mm. In combination with the Spincap, the lash ensures that all tiles are aligned at the exact same level on the top edge.
BLANKE LEVITO SPIN SPINCAP
Color:
blue
|
Selection:
6 buckets of 100 each
The BLANKE LEVITO SPIN SPINCAP is part of the BLANKE LEVITO SPIN leveling system. This set is a tool for avoiding lippage, especially with large-format tiles and slabs. The screw system can be used without additional tools. The Spincaps, in combination with the threaded lash, ensure that all tiles are aligned at the exact same level on the top edge. The cap fixes the position until the tile adhesive hardens. The Spincap is reusable. The bucket contains 100 pieces.
BLANKE LEVITO SPIN PROTECTION WASHER
The backing plate serves to protect the surface of sensitive tiles and slabs. Using the table, you can determine the number of Spincaps and threaded lashes required per m².