BLANKE PERMATOP SF 14
BLANKE PERMATOP SF 14 is a thin-layer surface heating and cooling system with a 21mm installation height, making it ideal for renovation projects. The system is applied directly onto the existing floor covering, saving valuable time and demolition costs while also reducing noise and dust during the renovation process. The system is defined by three key components: the self-adhesive fiber mesh mat, the high-quality 14mm 5-layer PE pipe with Velcro coating, and the fast-curing energy distribution layer BLANKE FILLOTHERM. Thanks to the Velcro connection, the installation of the Velcro pipe is particularly simple. To optimize the system, it is recommended to combine BLANKE PERMATOP SF 14 with the reinforcing decoupling mat BLANKE PERMAT. For maximum efficiency of this thin-layer surface heating and cooling system, we suggest using it with tile or natural stone coverings.
All About the BLANKE PERMATOP SF 14 Underfloor Heating System
Are you looking for an underfloor heating system with an exceptionally low installation height for your renovation project, allowing you to skip the time-consuming and labor-intensive removal of the existing floor? Then the BLANKE PERMATOP SF 14 is the perfect solution for your needs.An energy-efficient renovation saves on energy costs in the long term and noticeably enhances living comfort. However, one common challenge in renovation projects is the available installation height.
Especially Suitable for Renovations
The BLANKE PERMATOP SF 14 surface heating and cooling system is an underfloor heating solution particularly suited for renovation projects, thanks to its low system height of only 16 mm (21 mm when combined with the BLANKE PERMAT decoupling mat). A pipe coverage of 1-3 mm is required, and for ceramic coverings, even just 1 mm of coverage is sufficient.
The system comprises three main components: The self-adhesive fiber mesh mat is simply adhered to the existing substrate. The heating pipe, wrapped with a Velcro fabric, is then laid. Finally, the energy distribution layer BLANKE FILLOTHERM is applied to complete the system.
Quick and Flexible Installation
Unlike dry construction systems, the PERMATOP SF 14 is not limited to a specific installation grid, allowing for greater flexibility during installation. The pipe adheres securely to the fiber mesh mat thanks to Velcro technology and can be adjusted at any time during the installation process. After the pipes are laid, the energy distribution layer BLANKE FILLOTHERM is poured in. In combination with ceramic coverings and the BLANKE PERMAT decoupling mat, the system is ready for further installation after just 24 hours. Compared to traditional screed, the BLANKE FILLOTHERM can save up to 5 weeks of construction time.
No Demolition Required
The underfloor heating system is installed directly onto the existing floor covering, eliminating the need for prior demolition and avoiding additional costs. Moreover, the renovation generates less dirt and moisture compared to conventional screed systems, allowing you to continue living in the property during the renovation phase.
Minimal Installation Height
The system has a height of only 21 mm, including decoupling. It is the perfect solution for any project where installation height is a challenge.
No Demolition
The BLANKE PERMATOP SF 14 complete system is applied directly onto the existing floor. This eliminates the need for demolition, which would otherwise involve significant dirt and effort.
Quick Installation
Thanks to Velcro technology, the installation is flexible and, above all, time-saving. The heating circuits can be adjusted at any time during installation.
Coordinated System for Quick Renovation
The system is defined by three key components: The self-adhesive fiber mesh mat is applied directly to the existing substrate. Next, the high-quality 14mm 5-layer PE pipe with Velcro coating is pressed onto the fiber mesh mat to securely attach it. To complete the floor surface, the fast-curing energy distribution layer BLANKE FILLOTHERM is poured. BLANKE FILLOTHERM is walkable after just 90 minutes and ready for tile installation within 24 hours when used in combination with the BLANKE PERMAT decoupling mat and tiles. A key advantage for homeowners: The property can remain occupied during the renovation work.
Fiber Mesh Mat
The fiber mesh mat is equipped with an installation grid, making it easy to arrange the heating circuits. The self-adhesive mat can be effortlessly applied to the existing substrate.
Heating Pipe
The heating pipe is wrapped with a Velcro fabric, allowing it to be easily attached to the fiber mesh mat. Thanks to this technology, the heating pipe adheres securely to the substrate on its own.
Energy Distribution Layer
BLANKE FILLOTHERM is an energy distribution layer. It features an exceptionally fast drying time and ensures even heat distribution.