BLANKE PERMATOP ECO
BLANKE PERMATOP ECO is a resource-saving drywall underfloor heating system with a construction height of 35 mm with integrated thermal insulation and decoupling. The system consists of EPS-based system panels with a factory-applied heat-conducting plate Aluminum and a high-quality metal composite tube. What is crucial with this underfloor heating is the idea of efficiency - the pipe spacing of 16.6 cm is perfect for use in combination with all regenerative heat generators. The use of raw materials is deliberately reduced here without reducing the performance of the system. Through the Dry construction ensures quick assembly and short drying times.
BLANKE PERMATOP ECO COMPLETE SET
Discover the practical BLANKE PERMATOP ECO COMPLETE SET. All the system components you need from a single source: system panels, decoupling mat, edge insulation strips, adhesive, system pipe and edge insulation strips. You can make product inquiries here per square meter (1 set = 1m²).
Underfloor heating as a dry construction system for maximum efficiency and speed
The BLANKE PERMATOP ECO is a water-based drywall underfloor heating system, which is perfect for renovation and for combination with a heat pump thanks to the installation distance of 16cm. The use of raw materials is deliberately reduced here without reducing the performance of the system. Unlike other systems, a thinner aluminum layer was applied here and the deflection elements deliberately do without the aluminum heat conducting plates. Resources should be used sensibly without reducing performance. The surface heating and cooling system with a construction height of just 35 mm uses an EPS-based installation board, which means there is no need for screed. The construction time can be shortened by up to 4 weeks due to significantly shorter drying times.
Effective heat distribution
Screed-based surface heating loses a lot of heat to adjacent components or rooms. They are also colloquially considered sluggish because heating up takes a long time due to the thick screed covering.
The BLANKE PERMATOP underfloor heating ECO is characterized by its design, which eliminates precisely these disruptive factors. Dhe heat source in the Blanke drywall systems is located directly under the floor covering; the system plate also has insulating properties that prevent the heat from escaping example is lost to lower rooms. The heat radiation is distributed evenly and quickly throughout the room by the aluminum baffles - you will feel the heat in no time after switching it on.
Underfloor heating for tiles and natural stone
A surface heating system with a tile top covering is particularly efficient. You know this principle from a fireplace, for example.
Tiles are easy to care for and durable, but the crucial point is that the heat-conducting properties of a tile are ideal for underfloor heating. Tiles are suitable for storing heat and can also give off the heat directly. With the BLANKE PERMATOP ECO, as described above, no screed needs to be heated. The heat is transferred directly to the tile and distributed throughout the room. This means that the heating is not sluggish, but reacts particularly quickly!
Long-lasting thanks to integrated decoupling
If you still have concerns about using tiles or natural stone coverings because tiles could crack due to the heat, we can reassure you. The system is perfected by the decoupling and covering support mat BLANKE PERMAT. The BLANKE PERMAT offers enormous pressure stability and prevents the covering from expanding due to the heat. The tiles are reliably protected by the system, even under high loads. This unique combination enables a thin structure without having to forego even and rapid heat distribution.
Suitable for heat pumps
It is repeatedly emphasized that heat pumps work particularly well and economically when used with surface heating. This is because the heat pump can work with a very low flow temperature thanks to the underfloor heating and the entire floor becomes a radiator. The heat is therefore introduced over a large area. The BLANKE PERMATOP ECO underfloor heating is perfect for operation with a heat pump, as the design of the system is designed for high efficiency.
Little insider tip: With a heat pump you can turn underfloor heating into floor cooling. Perfect for summer and more pleasant than air conditioning.
Very fast responding system
Noticeable warmth in no time. The system sits close to the floor covering and the heat can be felt directly.
Energy-efficient operation
High-quality materials ensure the best heating result and quick and even heat distribution.
Low installation height
Only 35mm system height, with integrated insulation for best efficiency. The complete system has everything.