BLANKE PERMATOP BF / BFC / BF+ surface heating and cooling system
BLANKE PERMATOP BF, BFC and BF+ are ideal solutions for installing underfloor heating in the course of renovation projects. The systems comprise a studded panel made of pressure-resistant polystyrene, whereby the BFC system includes footfall sound insulation (30-2) and the BF+ system features thermal insulation (WLG 040). The highly flexible BLANKE PERMATOP PIPE 14/16 PE-RT heating pipes can be easily pressed into the studded panel and are reliably protected against damage by the internal oxygen barrier layer. The proven BLANKE PERMAT decoupling mat perfectly rounds off this system when used with tile and natural stone coverings.
Would you like to know more about this underfloor heating?
All information about the BLANKE PERMATOP BF underfloor heating family
Are you looking for water-based underfloor heating that can be installed with conventional screed? Then the BLANKE PERMATOP BF family is perfect!
BLANKE PERMATOP BF
As a thin-layer surface heating and cooling system The BLANKE PERMATOP BF solution was developed. This is a complete system, which is processed with typical construction site screeds can be. The system consists of apolystyrene Dimpled plate, which ensures controlled shrinkage of the screed thanks to the special circular geometry System disk enables. Due to the specified tension reduction This system construction is free of shrinkage stress in the screed. The heating tube with either 14 or 16 mm diameter is made of polyethylene (PE-RT) with EVOH oxygen barrier layer. This protects the 5-layer pipe against damage during processing. The system is supported by the BLANKE covering carrier PERMAT completes the surface perfectly protects against stress cracks and high loads. Through the special construction can be used when using Tiles/natural stone as a top covering for a drying time of the screed and the heating protocol are dispensed with and thus save a few weeks. The BLANKE PERMATOP BF system was developed by the University of Stuttgart tested and certified.
BLANKE PERMATOP BF+
The BLANKE PERMATOP surface heating and cooling system BF+ is a further development of BLANKE PERMATOP BF system series. In addition to the advantages of the PERMATOP BF, the BLANKE PERMATOP BF+ system stands out through integrated thermal insulation (WLS 035) out of. It is suitable due to its low installation height of only 31mm for the optimal combination with other insulating materials as a substrate. Through the foamed The system is special with its studded plate pressure-stable and can be used without during the construction phase additional protective measures.
BLANKE PERMATOP BFC
The BLANKE PERMATOP surface heating and cooling system BFC is a further development/expansion the BLANKE PERMATOP BF system series. Besides the Advantages of the PERMATOP BF draws it characterized by a combined impact sound and thermal insulation which is a impact sound improvement measure of up to 28 dB possible. The integrated thermal insulation with the WLS 040 meets the minimum requirements in accordance with the standard for thermal insulation other rooms of R=0.75m²k/W and is through the system reliably fulfills. The system with a construction height of 59 mm does not require any additional insulation board. The construction enables the most efficient utilization of the heat introduced to the room without Energy losses to adjacent components. The system stud plate is foamed here and offers a particularly high pressure stability. She can too during the construction phase without additional protective measures can be entered.
