BLANK PERMATOP 1000
BLANKE PERMATOP 1000 COMPLETE SET
Discover the practical BLANKE PERMATOP 1000 COMPLETE SET. All the system components you need from a single source: system panels, decoupling mat, edge insulation strips, adhesive, system pipe and edge insulation strips. You can make product inquiries here per square meter (1 set = 1m²).
Underfloor heating as a dry construction system for maximum efficiency and speed
The BLANKE PERMATOP 1000 is an innovative water-based drywall underfloor heating. The surface heating and cooling system with a construction height of 35 mm uses an EPS-based installation board, which means that the use of screed is completely unnecessary. The construction time can be shortened by up to 4 weeks due to significantly shorter drying times.
Efficient Heat Distribution
The biggest disadvantage of an underfloor heating system can be that a significant amount of energy is lost to the subfloor or adjacent building components. Many owners of older underfloor heating systems also complain about slow response times and sluggish heat distribution. This is often due to the installation method and system design.
The BLANKE PERMATOP 1000 underfloor heating system is distinguished by a design that specifically overcomes these issues. Unlike conventional underfloor heating systems, where the heating pipes are, for example, milled into the floor, this system offers the key advantage that the heat source is positioned directly beneath the floor covering and is additionally insulated from below. As a result, radiant heat is transferred directly into the room, minimizing energy loss to surrounding building components or the subfloor.
In addition, the system responds particularly quickly, allowing heat to be distributed evenly throughout the entire room in a short time.
The complete PERMATOP 1000 underfloor heating system consists of EPS-based installation panels with factory-bonded aluminum heat distribution plates. These ensure even heat distribution across large areas and provide excellent heat output. Preformed omega loops make it easy to install the heating pipes. With this system, you save valuable energy while enjoying consistent radiant heat throughout the entire room.
Underfloor Heating for Tiles and Natural Stone
From a practical perspective, combining underfloor heating with tile or natural stone flooring offers the greatest benefits.
Tiles are the ideal floor covering, especially when used with a low-profile underfloor heating system. They are not only durable and easy to maintain, but their excellent thermal conductivity also makes them perfectly suited for underfloor heating. You may know this from fireplaces or tiled stoves—tiles store heat efficiently and release it evenly into the room. With the BLANKE PERMATOP 1000, as described above, there is no screed that needs to be heated first. Instead, the heat is transferred directly to the tile and then distributed throughout the room. This means the heating system is highly responsive rather than slow to react. Many homeowners initially prefer wooden flooring because they associate it with warmth and comfort. However, this is a common misconception. Wood acts as an insulating layer, reducing heat transfer and making an underfloor heating system less responsive.
But don't worry! Blanke dry construction systems are also suitable for wooden floors. However, our clear recommendation is always a ceramic floor covering to achieve the best possible performance.
Long-Lasting Performance Thanks to Integrated Uncoupling
If you are still concerned about using tile or natural stone because you fear the flooring could crack due to thermal stress, there is no need to worry. The system is perfected by the uncoupling and tile carrier mat BLANKE PERMAT. BLANKE PERMAT provides exceptional compressive strength and helps absorb stresses caused by thermal expansion, protecting the floor covering from damage. This ensures that tiles remain reliably protected, even under heavy loads. This unique combination makes it possible to achieve a low-profile installation without compromising on fast, even heat distribution.
Suitable for Heat Pumps
It is widely recognized that heat pumps operate most efficiently and economically when combined with underfloor heating systems. This is because the underfloor heating allows the heat pump to run at a very low flow temperature, while the entire floor acts as a large radiant heating surface. As a result, heat is distributed evenly across a large area. The BLANKE PERMATOP 1000 underfloor heating system is ideally suited for use with heat pumps, as its design is specifically engineered for maximum efficiency.
A useful bonus: With a heat pump, your underfloor heating system can also be used for floor cooling. This provides comfortable cooling during the summer and is often perceived as more pleasant than conventional air conditioning.
Fast-Responding System
Noticeable warmth in no time. The system is installed directly beneath the floor covering, allowing heat to be felt almost immediately.
Energy-Efficient Operation
High-quality materials ensure outstanding heating performance with fast and even heat distribution.
Low Installation Height
With a system height of just 35 mm, including integrated insulation for maximum efficiency. The complete system includes everything required for installation.