SELF-ADHESIVE WATERPROOFING SYSTEM BLANKE DISK
BLANKE DISK is a self-adhesive sealing system made with polyolefin foam for indoor areas which requires no additional tile adhesive. Much of the damage caused by moisture results from poorly installed sealing, and mostly occurs in the transitions from the wall to the floor from penetration or due to leaking overlaps. BLANKE DISK reliably prevents this, as it creates an inseparable cold weld during the bonding which is immediately 100% waterproof. The system is also extremely flexible and bridges cracks.
Matching moulded parts provide for reliable sealing in every area of application. Use BLANKE GROUND and BLANKE PRIMER for ideal preparation of the substrate.
The composite sealing offers maximum evenness in the region of the butt joints and is therefore ideal when laying large formats. After the composite sealing has been bonded to the wall and floor, the covering can be applied immediately.
For an uncomplicated and seamless connection to the BLANKE DISK composite sealing system, take a look at our drainage systems with their pre-installed, self-adhesive sealing flange.
BLANKE DI-SECURE
CUT PROTECTION LINING MESH
Length:
10 m
|
Width:
50 mm
BLANKE DI-SECURE is a universal, thin, cut protection weave designed to protect waterproofing membranes in corners and between wall and floor transitions. The self-adhesive, double-woven mesh is incorporated in the application to protect waterproofing membranes, for example when renewing silicone joints.
BLANKE DISK SB
TRANSITION TAPE
Length:
10 m
|
Width:
10 cm
The BLANKE DISK SB is a threshold sealing tape of the self-adhesive sealing system BLANKE DISK. It has a width of 10 cm and a length of 10 m. The piece is used to integrate profiles in the transition area from room to room into the sealing level. By embedding the profiles, it prevents capillary-driven water from, for example, damaging adjacent rooms, parquet, or laminate floors.
BLANKE DISK TAPE
CORNER WATERPROOFING MEMBRANE
Length:
30 m
|
Width:
10 cm
The BLANKE DISK TAPE is the corner sealing tape of the BLANKE DISK self-adhesive sealing system. It has a width of 10cm and a length of 30m. The tape can be applied to corner areas and the floor-to-wall connection area, with application made easier by the split release liner on the back of the tape.
BLANKE DISK CORN-LINE
INNER CORNER FOR BLANKE DISK-LINE
Height:
10 cm
|
Width:
10 cm
The BLANKE DISK CORN-LINE is a fitting of the self-adhesive sealing system BLANKE DISK. It is an inner corner piece with a width of 10 cm and a length of 10 cm.
BLANKE DISK I-BOX
COLLAR, SELF-ADHESIVEBEND
The BLANKE DISK I-BOX is a collar of the BLANKE DISK self-adhesive sealing system. It has a hole in the center with a diameter of 90mm. This fitting is specially designed for flush-mounted fittings and features a flexible membrane that ensures a clean fit to the fitting to be sealed.
BLANKE BC
FITTING CLIP
BLANKE BC is an expansion joint mounting aid made of plastic, which can be used for both the BLANKE DIBA system and the BLANKE DISK system. It facilitates the bonding and sealing around already installed connections when a finished pipe extension is not yet available.
BLANKE DISK SOCKELTAPE
WITH FLEECE LAMINATION ON ONE SIDE, SELF-ADHESIVE
Length:
30 m
|
Width:
12 cm
The BLANKE DISK SOCKELTAPE is a self-adhesive corner sealing tape with one-sided fleece lamination, part of the BLANKE DISK sealing system. It has a width of 12cm and a length of 30m. The tape is used to create a watertight transition from the floor to the wall when the wall area is not fully sealed.
BLANKE DISK HM
HEATING PIPE COLLAR
Length:
20 cm
|
Width:
12 cm
The BLANKE DISK HM is a heating pipe collar of the BLANKE DISK self-adhesive sealing system. It has a width of 12cm and a length of 0.2m, as well as two holes with a diameter of 10mm each. This fitting is suitable for sealing heating pipes.
BLANKE DISK AM
SURFACE-MOUNTED COLLAR
Length:
25 cm
|
Width:
12 cm
The BLANKE DISK AM is a surface-mounted collar of the BLANKE DISK self-adhesive sealing system. It has a width of 12cm and a length of 0.25m, as well as two holes with a diameter of 10mm each. This fitting can be used when two pipes need to be sealed.
BLANKE DISK AB
EDGE TAPE, SELF-ADHESIVE
Length:
30 m
|
Width:
10 cm
The BLANKE DISK AB is the self-adhesive end tape for the BLANKE DISK sealing system. It has a width of 10cm and a length of 30m. The tape can be used to cover the non-fleece area of the sealing sheet at the end of the sealing process.
BLANKE DISK KS
CAPILLARY PROTECTION TAPE
Length:
10 m
|
Width:
10 cm
The BLANKE DISK KS is a capillary protection tape of the self-adhesive sealing system BLANKE DISK. It has a width of 10 cm and a length of 10 m. The tape is used to prevent capillary transport on the water-carrying layer.
BLANKE DISK CORN-SBKS
CAPILLARY PROTECTION TAPE
Height:
1 cm
|
Width:
7,5 cm
The BLANKE DISK CORN-SBKS is a fitting of the self-adhesive sealing system BLANKE DISK. It is a capillary protection corner with a width of 7.5 cm, a height of 1 cm, and a length of 7.5 cm.
BLANKE DISK-PRIMER
SPRAY ADHESIVE
The BLANKE DISK-PRIMER is a spray adhesive for the BLANKE DISK self-adhesive sealing system. It has a volume of 500ml and is suitable for repairing damaged seals and priming substrates with high residual moisture.
BLANKE DISK CORN-A
OUTER CORNER, SELF-ADHESIVE
Height:
7 cm
|
Width:
10 cm
The BLANKE DISK CORN-A is a fitting of the BLANKE DISK self-adhesive sealing system. It has a width of 10cm and a height of 70mm. The BLANKE DISK CORN-A is suitable for sealing outer corners but can also be twisted for use on shelves, niches, or recesses.
BLANKE DISK WB
BATHTUB WATERPROOFING MEMBRANE, SELF-ADHESIVE
Length:
30 m
|
Width:
9,5 cm
The BLANKE DISK WB is a self-adhesive tub sealing tape, part of the BLANKE DISK sealing system. It has a width of 9.5cm and a length of 30m. This tape is used to integrate bathtubs and shower trays into the sealing layer, ensuring seamless waterproofing.
BLANKE DISK CORN-FLEX
FOR BATHTUB WATERPROOFING MEMBRANE, SELF-ADHESIVEBEND
Height:
12,5 cm
|
Width:
12,5 cm
The BLANKE DISK CORN-FLEX is a fitting part of the self-adhesive sealing system BLANKE DISK. It has a width of 12.5cm and a height of 9.5cm. BLANKE DISK CORN-FLEX is a self-adhesive, flexible corner sealing for bathtubs with a ledge, used in combination with BLANKE WB.
BLANKE DISK CORN-I
INNER CORNER, SELF-ADHESIVE
Height:
15 cm
|
Width:
15 cm
The BLANKE DISK CORN-I is a fitting of the BLANKE DISK self-adhesive sealing system. It has a width of 15cm and a length of 15cm. This fitting is used to seal inner corners but can also be twisted to seal outer corners, such as for shelves.
BLANKE DISK CORN-WB
CORNER FOR BATHTUB WATERPROOFING MEMBRANE, SELF-ADHESIVE
Height:
9,5 cm
|
Width:
9 cm
The BLANKE DISK CORN-WB is a fitting part of the self-adhesive sealing system BLANKE DISK. It has a width of 9cm and a height of 9.5cm. BLANKE DISK CORN-WB is a self-adhesive corner extension for bathtubs and shower trays, used in combination with BLANKE WB to ensure the tub sealing tape is neatly applied in the corner areas.
BLANKE DISK-KEIL
MOULDED PART, LEFT
Height:
20 mm
|
Selection:
Left stop
The BLANKE DISK-KEIL LEFT is a fitting of the self-adhesive sealing system BLANKE DISK. It is a piece with a left stop for linear drainage with a height of 20mm. The BLANKE DISK WEDGE is specifically used when the BLANKE DISK-LINE linear drainage system is applied to ensure a seamless seal.
BLANKE DISK
WATERPROOFING MEMBRANE WITH BLANKE DISK TOOL
Length:
30 m
|
Width:
50 cm
BLANKE DISK is a self-adhesive sealing system that does not require additional tile adhesive. The overlapping areas bond through cold welding, making the system 100% waterproof. Matching fittings enable secure sealing in every application area. The composite seal is adhered to the floor and wall before large-format tiles can be laid without waiting time. Discover our drainage systems with factory-applied self-adhesive sealing flanges for seamless integration with the BLANKE DISK composite sealing system. BLANKE DISK has a width of 50cm and a length of 30m.
BLANKE DISK COVERTAPE
PROTECTION TAPE
Length:
25 m
|
Width:
12 cm
The BLANKE DISK COVERTAPE is a dirt protection tape of the self-adhesive sealing system BLANKE DISK. It has a width of 12 cm and a length of 25 m. The tape protects sealing transitions from contamination and is self-adhesive.
BLANKE DISK BM
FLOOR COLLAR, SELF-ADHESIVE
The BLANKE DISK BM is a floor collar of the BLANKE DISK self-adhesive sealing system. It has a diameter of 21cm and a highly flexible membrane in the center with an outlet diameter of 28mm. It is specifically designed for sealing pipes with a diameter of DN 50.
BLANKE SOUND INSULATION TAPE
SELF-ADHESIVE
Length:
10 m
|
Width:
3 cm
Approved by the (German) building inspectorate, the BLANKE DIBA waterproofing system fulfills the requirements. Fleece laminated on both sides the waterproofing membrane is a waterproofing material in sheet form for use in conjunction with tiles and slabs. The waterproofing membrane is suitable for waterproofing indoor rooms; there are appropriately harmonized waterproofing tapes, waterproofing collars and a diverse range of moulded parts available to supplement the waterproofing system. BLANKE DIBA-COLL sealant is available for butt joints and is a successfully tested system component. It is also possible to use BLANKE DIBA in outdoor areas according to the suitability of the material properties.
BLANKE DISK WM
WALL COLLAR, SELF-ADHESIVE
Height:
12 cm
|
Width:
12 cm
The BLANKE DISK WM is a wall collar of the BLANKE DISK self-adhesive sealing system. It has a width of 12cm and a height of 12cm, with a highly flexible membrane in the center with an outlet diameter of 10mm. The collar ensures reliable sealing of supply lines and has a perforated release liner on the back to allow for split application.