BLANKE CORNER ANGEL
The BLANKE CORNER ANGLE is the professional refrofit solution when it subsquently emerges that tiled corners and edges need protecting against the effects or significant mechanical loads. The 1.0 mm gauge angle section made of stainless steel, material 1.4301 (V2A), matt brushed (240 grain size), is covered with a protective film and if desired, with double-sided adhesive tape pn the inside surfaces of the legs. The edges are burr-free.
BLANKE CORNER ANGLES
Brushed Stainless Steel
Color:
Natural
|
Height:
30 mm
|
Length:
1,5 m
|
Selection:
With adhesive tape
|
Surface:
Brushed
The Blanke Corner Angle is the professional retrofit solution when it subsequently emerges that tiled corners and edges need protecting against the effects of significant mechanical loads. The 1.0 mm gauge angle section made of stainless steel, material 1.4301 (V2A) or 1.4401 (V4A), matt brushed (240 grain size), is covered with a protective film and if desired, with double-sided adhesive tape on the inside surfaces of the legs. The edges are burr-free.
BLANKE CORNER ANGLES
Brushed Stainless Steel
Color:
Natural
|
Height:
60 mm
|
Length:
1,5 m
|
Surface:
Brushed
The Blanke Corner Angle is the professional retrofit solution when it subsequently emerges that tiled corners and edges need protecting against the effects of significant mechanical loads. The 1.0 mm gauge angle section made of stainless steel, material 1.4301 (V2A) or 1.4401 (V4A), matt brushed (240 grain size), is covered with a protective film and if desired, with double-sided adhesive tape on the inside surfaces of the legs. The edges are burr-free.
BLANKE CORNER ANGLES
Stainless Steel V4A brushed
Height:
30 mm
|
Length:
1,5 m
|
Selection:
Acid-resistant
|
Surface:
Brushed
The Blanke Corner Angle is the professional retrofit solution when it subsequently emerges that tiled corners and edges need protecting against the effects of significant mechanical loads. The 1.0 mm gauge angle section made of stainless steel, material 1.4301 (V2A) or 1.4401 (V4A), matt brushed (240 grain size), is covered with a protective film and if desired, with double-sided adhesive tape on the inside surfaces of the legs. The edges are burr-free.