REINFORCING UNDERLAYMENT FOR TILE AND STONE
Decoupling is an important step in preparing the substrate before laying the tiles. The decoupling mats from Blanke Systems absorb movements from the substrate so that these are not transferred to the tile surface, and in doing so prevent cracking. The products from Blanke Systems are suitable for all substrates and allow for early installation of the floor covering.
We introduce you to our best decoupling mat!
The BLANKE PERMAT is our reinforcing covering carrier and decongestion mat. Compared to other decompression solutions, PERMAT has a number of advantages to offer. We will introduce you to exactly what these are later on.
Safety for tiles - for almost 20 years
It depends on the surface: the innovative, reinforcing one BLANKE PERMAT covering carrier and decoupling mat has been providing safety for all ceramic products for over 17 years Tiles and natural stone coverings. Because BLANKE PERMAT stands well on all surfaces - even demanding ones Mixed substrates – as an additional layer with little Installation height provides a stable basis for all types of tiles and formats. Problems with the subsurface are compensated for and a permanently functionally reliable consolidation, Crack bridging and decoupling between the substrate and top covering.
The high-quality covering carrier mat with a height of just 3.3 mm consists of three layers: one that is non-slip Glass mesh, extruded and twisted PEHD bars and a decoupling fleece. The two of them Layers of mesh act like reinforcement under the tile. The result: optimal load transfer, Unique adhesion value, enormous grip of the tile adhesive.BLANKE PERMAT is also used as a basis elementary system component of the screed-free underfloor heating and cooling system BLANKE PERMATOP as well as the Floor system with insulation BLANKE PERMATFLOOR. Thanks to BLANKE PERMAT, a traditional one becomes Floor construction is a modern multifunctional floor while easily absorbing the highest traffic loads lasting functionality and beauty of the floor guaranteed.
No tile breaks optimal protection at point loads
A lot of weight on one point often leads to breakage the tile. BLANKE PERMAT protects the tiles optimally even with high point loads from above. In order to prevent tile breaks, the subsurface may have no flexibility, and the load of the subsurface must be minimized. Thanks to the consistent height and uniform grid structure BLANKE PERMAT is particularly wide Distribution of the load possible. This is how the stable serves Mat in combination with the thin-bed mortar as a load distribution layer that can withstand twice as much as comparable products. The BLANKE PERMAT can withstand point loads of up to 15.96kN.
Unique strength that Tile adhesive standard complies with
The mat structure holds the tile and adhesive firmly to the surface. Compared to other mats, one to Guarantees seven times stronger adhesion of the tiles. The subsurface always has a different coefficient of expansion than the tile. Furthermore, there are none absolutely rigid surfaces. Shear forces that occur occur mainly due to temperature differences, ensure movement between the ground and Tile and can cause the tile to detach. Especially with large format tiles with little The joint portion is therefore a secure decoupling layer essential. The biggest benefit of BLANKE PERMAT consists of stiffening the upper Layers responsible for liability. movements be between the stiffening upper layer and the lower decoupling layer. The result: the adhesion value of BLANKE PERMAT is outstanding and almost corresponds the required value for tile adhesive (1N/mm²). The tensile adhesive strength of BLANKE PERMAT is 0.93 N/mm².
Significant solidification the floor construction
The covering carrier mat can withstand the highest traffic loads from: 7.5 kN/m2. This enables tiling, where previously there was extensive preparation was necessary to dismantle old coverings. By absorbing high traffic loads, BLANKE PERMAT without restrictions in all areas Can be used where tiles are laid. Therefore is the mat for private areas (kitchens, bathrooms, living room etc.) as well as for commercial use Use (hotels, car dealerships, showrooms, workshops etc.) is always the best choice. All possibilities remain open – for example in the event of changes in use of areas and buildings.
Ideal for renovations thanks to the very low installation height
No comparable base mat offers this such great functionality and convincing Load distribution with only 3.3 mm material thickness. This low installation height is ideal for BLANKE PERMAT for use in old building renovations. The simultaneous reinforcement and decoupling at only 3.3 mm thickness sets the mat apart from similar structures away. No other comparable product can with such values at such a low installation height convince.
Safe drying of the Adhesive guaranteed
The high diffusivity of the lower, diffusion-open Layer supports safe drying of the glue: The moisture of the glue is during not locked in during the curing time. Thanks to the decoupling function of the lower diffusible BLANKE enables special fleece PERMAT also enables significantly earlier laying of Tile coverings, as shape changes due to the The shrinkage process is significantly minimized and recorded become. Even on fresh cement screeds can therefore be accessed immediately after they are accessible Laying tiles. Conclusion: BLANKE PERMAT ensures for shorter construction times and extends durability of the surface covering clearly.