BLANKE FLEX-LINE COVER
The BLANKE FLEX-LINE is a flexibly adaptable, two-part drain system for barrier-free shower areas with a factory-installed sealing flange for the composite sealing systems BLANKE DISK and BLANKE DIBA. The cover of the drainage line can be shortened individually, up to 40 cm.
The BLANKE FLEX-LINE consists of a drainage unit with an integrated siphon and a factory-fitted sealing flange as well as an in The stainless steel cover with design insert can be adjusted in length to suit the construction site situation. The horizontal version of the drainage unit is designed for installation on the left and right sides as well as for drainage to the front and rear. The factory-fitted sealing flange enables a clean connection of the surface sealing in the floor and to the adjacent wall area, thus creating the highest level of safety.
BLANKE FLEX-LINE GRATE COVERS
Design 1, matt black
Color:
Matte Black
|
Height:
10,0-18,0mm
|
Length:
90 cm
|
Selection:
DESIGN 1
|
Surface:
Coated
|
Width:
60 mm
The BLANKE FLEX-LINE GRATE COVER with designer insert matches the BLANKE DISK FLEX-LINE drainage unit and the BLANKE DIBA FLEX-LINE drainage unit. It is available in three different design versions. The entire cover can be shortened to 40 cm around the drain body to enable a flexible design when combined with the different versions. The BLANKE FLEXLINE COVER can be variably adapted to the covering thickness from 10 to 18 mm.
BLANKE FLEX-LINE GRATE COVERS
Design 1, Brushed Stainless Steel
Height:
10,0-18,0mm
|
Length:
90 cm
|
Selection:
DESIGN 1
|
Surface:
Brushed
|
Width:
60 mm
The BLANKE FLEX-LINE COVER with design inserts completes the BLANKE DISK FLEX-LINE drainage unit and the BLANKE DIBA FLEX-LINE drainage unit. They are available in stainless steel or black matte powder-coated finishes, with three different design variants each. The entire cover can be shortened to 40 cm around the drain body, allowing for flexible design possibilities when combined with the design variants. The BLANKE FLEX-LINE COVER is suitable for tile thicknesses between 10 and 18 mm and can be adjusted in height accordingly.