BLANK AQUA KEIL GLASS
BLANKE AQUA-KEIL GLAS is a glass holding profile with an integrated sloped edge (2%). It is particularly suitable for floor-level showers. It creates the slope to the drainage channel in one step and offers a rail on the upper side to hold the glass. The elegant design of floor-level showers is so easy and safe. A decisive advantage of the BLANKE AQUA-KEIL GLAS is that the profile is glued in directly when laying the tiles. This not only saves you from having to cut the tiles, but also from drilling into the tiles. The seal is never damaged with this system because no screws are used. The safety of the glass retaining profiles has been TÜR-certified. The BLANKE AQUA-KEIL GLASS is available as a left and right version and is ideal for use with a matching Blanke drainage channel.
AQUA-KEIL GLASS
Stainless steel Sand Tropez, left version
Color:
Sand Tropez
|
Height:
42 mm
|
Length:
148 cm
|
Selection:
Left stop
|
Surface:
Coated
Fitted with a profile to mount glass partition walls (e.g. near linear drains), the BLANKE AQUA-KEIL GLASS provides a gradient edge for attractive floor-level showers.
AQUA-KEIL GLASS
Stainless steel Urban Grey, right version
Color:
Urban Grey
|
Height:
42 mm
|
Length:
148 cm
|
Selection:
Right stop
|
Surface:
Coated
Fitted with a profile to mount glass partition walls (e.g. near linear drains), the BLANKE AQUA-KEIL GLASS provides a gradient edge for attractive floor-level showers.
AQUA-KEIL GLAS
Edelstahl Greige, linker Anschlag
Color:
Greige
|
Height:
42 mm
|
Length:
148 cm
|
Selection:
Left stop
|
Surface:
Coated
The BLANKE AQUA-KEIL GLAS in Greige stainless steel finish is part of the slope and shower profiles. This profile allows for the installation of glass partition walls (e.g., with linear drainage) and creates a sloped edge for an aesthetically pleasing design of barrier-free showers. The sloped edge is available in both right and left versions; in this case, it has a left offset. A perfect addition to the BLANKE AQUA-KEIL and already included is the BLANKE DIBA-KEIL or BLANKE DISK-KEIL piece for reliable sealing of the screed transition to the rising wall. The glass-holding profile has a height of 42mm and a length of 1480mm.
AQUA-KEIL GLAS
Edelstahl Cotton, linker Anschlag
Color:
Cotton
|
Height:
42 mm
|
Length:
148 cm
|
Selection:
Left stop
|
Surface:
Coated
The BLANKE AQUA-KEIL GLAS in Cotton stainless steel finish is part of the slope and shower profiles. This profile allows for the installation of glass partition walls (e.g., with linear drainage), creating a sloped edge for an elegant, barrier-free shower design. The sloped edge is available in both right and left versions; in this case, it has a left offset. Included as the perfect complement to the BLANKE AQUA-KEIL is the BLANKE DIBA-KEIL or BLANKE DISK-KEIL component for reliable sealing of the screed transition to the rising wall. The glass-holding profile has a height of 42mm and a length of 1480mm.
AQUA-KEIL GLASS
Stainless steel Graphit, right version
Color:
Graphite
|
Height:
42 mm
|
Length:
148 cm
|
Selection:
Right stop
|
Surface:
Coated
Fitted with a profile to mount glass partition walls (e.g. near linear drains), the BLANKE AQUA-KEIL GLASS provides a gradient edge for attractive floor-level showers.