With the patterns from Blanke You can present the appearance and functions of our products particularly clearly. Our high-quality patterns are very handy.
The BLANKE HAND SAMPLE PERMATOP SF shows the layer structure in the application example of the BLANKE PERMATOP SF 14 water-bearing surface heating system.
The BLANKE HAND SAMPLE PERMATOP NATURE shows the layer structure in the application example of the ecological and water-based surface heating system BLANKE PERMATOP NATURE. The system panel made of straw with factory-applied aluminum guide plate is completed with a high-quality metal composite pipe and is available in installation distances of 12.5 cm and 25 cm. With a construction height of 35 mm including integrated decoupling, this dry construction system is ideally suited for new builds and renovations. The dry construction method ensures quick installation and short drying times, and there is no need for screed, which saves a considerable amount of CO2.
The BLANKE HAND SAMPLE PERMATOP ECO shows the layer structure in the application example of the BLANKE PERMATOP ECO water-based underfloor heating system. The resource-saving drywall underfloor heating system with a construction height of 35 mm with integrated thermal insulation and decoupling consists of EPS-based system panels with factory-applied aluminum heat conducting sheet and a high-quality metal composite pipe. The efficiency concept is crucial for this underfloor heating system - the pipe spacing of 16.6 cm is perfect for use in combination with all regenerative heat generators. The use of raw materials is deliberately reduced here without reducing the performance of the system. The dry construction method ensures quick installation and short drying times.
The BLANKE HAND SAMPLE PERMATOP SF shows the layer structure in the application example of the BLANKE PERMATOP SF water-bearing surface heating system. The system consists of the self-levelling energy distribution layer BLANKE SF FILLER, water-bearing heating and cooling conductors made of a high-quality PE heating pipe with Velcro technology and a self-adhesive fiber fabric mat for easy installation.
The BLANKE PERMATOP 3000 HAND SAMPLE shows the layer structure in the application example of the BLANKE PERMATOP 1000 water-based panel heating system. The BLANKE PERMATOP 3000 panel heating and cooling system is a further development of the BLANKE PERMATOP 1000 system with corresponding advantages. The Neopor system panel used here (WLS 032) is characterized by a height of 31 mm and is always used when the installation height is limited. There is a choice of two different pipe spacings (12.5 cm and 25.0 cm).
Color:
Sand Tropez
|
Length:
19,5 cm
|
Surface:
Coated
The BLANKE PROFILE SAMPLE gives you the opportunity to view your desired color in real light conditions. Order color samples so that you can apply them to your favorite tile on site or to furniture in your bathroom/living room. Test the color in your new surroundings and determine your perfect personal color scheme.
BLANKE PREMIUM BOX is an empty sample box with a foam insert. For example, you can insert the BLANKE ECKBERT corner shelf here and use the box as a counter display. The box has a width of 22.5 cm, a length of 31 cm and a height of 5 cm.
The BLANKE ELOTOP 1000 HANDSAMPLE shows the layer structure in the application example of the BLANKE ELOTOP 1000 electric underfloor heating system together with the BLANKE PERMAT covering substrate. The electric underfloor heating system is an alternative to water-based underfloor heating and is ideal for renovation projects. The BLANKE ELOTOP 1000 HEATING TAPE is simply inserted into the ELOTOP 1000 system panel with aluminum heat conducting plate, which contributes to the fast, even and efficient heating of the floor during operation. The heating tape is self-regulating and the maximum temperature is reliably limited.
The BLANKE HAND SAMPLE PERMATOP SF shows the layer structure in the application example of the BLANKE PERMATOP SF water-bearing surface heating system. The system consists of the self-levelling energy distribution layer BLANKE SF FILLER, water-bearing heating and cooling conductors made of a high-quality PE heating pipe with Velcro technology and a self-adhesive fiber fabric mat for easy installation.
The BLANKE ELOTOP+ HAND SAMPLE shows the structure in the application example of the BLANKE ELOTOP+ electric panel heating system. The electric system can be used as full heating, but is also ideal as additional heating for the ideal temperature control of all tile and natural stone coverings - even in wet areas, e.g. in level-access showers. Thanks to the integrated temperature sensor, the feel-good temperature can be conveniently and individually regulated in every room according to your needs. No costly extensions to the existing central heating system are necessary for refurbishments and renovations, as BLANKE ELOTOP+ can be easily retrofitted as part of a renovation.
Height:
31 cm
|
Length:
5 cm
|
Selection:
I
|
Width:
22,5 cm
BLANKE PREMIUM I is a sample box for the presentation of BLANKE EDGE PROTECTOR TRIM. It has a width of 22.5 cm, a height of 31 cm and a length of 5 cm. The box contains, for example, samples of the BLANKE EDGE PROTECTOR TRIM, the BLANKE CUBELINE and the BLANKE QUARTER CIRCLE TILE TRIM, which are presented attractively side by side.
The BLANKE PROFILE SAMPLE gives you the opportunity to view your desired color in real light conditions. Order color samples so that you can apply them to your favorite tile on site or to furniture in your bathroom/living room. Test the color in your new surroundings and determine your perfect personal color scheme.
The BLANKE PROFILE SAMPLE gives you the opportunity to view your desired color in real light conditions. Order color samples so that you can apply them to your favorite tile on site or to furniture in your bathroom/living room. Test the color in your new surroundings and determine your perfect personal color scheme.
The BLANKE HAND SAMPLE PERMATOP BF shows the layer structure in the application example of the BLANKE PERMATOP BF water-based underfloor heating system. This is a complete system that can be used with screeds commonly used on construction sites. The system consists of a polystyrene studded panel, which enables controlled shrinkage of the screed thanks to the special circular geometry of the system panel. The heating pipe with a diameter of either 14 or 16 mm is made of polyethylene (PE-RT) with an EVOH oxygen barrier layer. The system is completed by the BLANKE PERMAT covering support, which perfectly protects the surface covering from stress cracks and high loads.
Color:
Midnight Black
|
Length:
19,5 cm
|
Surface:
Coated
The BLANKE PROFILE SAMPLE gives you the opportunity to view your desired color in real light conditions. Order color samples so that you can apply them to your favorite tile on site or to furniture in your bathroom/living room. Test the color in your new surroundings and determine your perfect personal color scheme.
The BLANKE LUXURY LINE BOX is used to present the BLANKE CUBELINE from the BLANKE LUXURY LINE. The dark, elegant design of the box emphasizes the exclusivity and highest quality of the profiles. The BLANKE LUXURY LINE BOX contains three BLANKE CUBELINE PROFILES, coated with 18 carat rose gold, 24 carat gold and in Black Platinum Effect.
The CLASSIC sample chain showcases proven finishes in stainless steel and aluminium – timeless, understated, and versatile. It features the classic versions of our tile trims and CUBELINE profiles, which integrate seamlessly into almost any bathroom or interior design. Perfect for those who value clean design and reliable functionality without compromising on quality or durability.
The BLANKE HAND SAMPLE PERMATOP 1000 shows the layer structure in the application example of the BLANKE PERMATOP 1000 water-based surface heating system. The innovative drywall underfloor heating and cooling system combines the advantages of an EPS-based installation panel and factory-applied heat conducting sheet with the high pressure stability of the BLANKE PERMAT covering support and decoupling mat as a load distribution layer. The heat-conducting sheet, which is also fully bonded in the deflection area, ensures even and extremely rapid heat distribution. The low weight per unit area of just under 11 kg/m² enables the use of water-based panel heating, particularly in renovations, timber constructions or on floors with wooden beam ceilings.
