BLANKE AQUA-KEIL WALL

Brushed Stainless Steel, left

Surface
Selection
Height
Length
Product number:
846-280B-060-L
EAN:
4016505071809
Product information "BLANKE AQUA-KEIL WALL"
The BLANKE AQUA-KEIL WALL stainless steel gradient edge profile for the perfect detail solution on inclined surfaces, to connect to walls when installing linear drainage. Available as a right and a left version.
Complete sales unit: 1
Height: 6/32 mm
In packaging: Carton
Length: 148 cm
Material: Stainless steel
Price unit: Piece
Sales unit count: 1
Sales unit type: Piece
Selection: Left stop
Storage unit: Piece
Surface: Brushed
Download

Kleines Bad: Badewanne raus, Walk-In-Dusche rein

Badsanierung für mehr Barrierefreiheit

Aus einem dunklen Wannenbad mit kleinformatigen Fliesen entstand ein heller, moderner Raum mit großzügiger, bodengleicher Walk-in-Dusche. Durch den Verzicht auf die Badewanne konnte die vorhandene Fläche deutlich besser genutzt werden. Großformatige Fliesen, klare Linien und die feststehende Glasabtrennung lassen das kompakte Badezimmer heute offener und ruhiger wirken.

Für die Entwässerung der neuen Duschfläche wurde die Linienentwässerung BLANKE FLEX-LINE aus Edelstahl eingesetzt. Sie lässt sich an die jeweilige Einbausituation anpassen und fügt sich dezent in den Fliesenbelag ein. So konnte die bodengleiche Dusche exakt auf den vorhandenen Grundriss abgestimmt werden.

Die Übergänge zwischen Gefällefläche, Wandbelag und Glasabtrennung wurden mit den BLANKE AQUA-PROFILEN ausgeführt. Die Profile nehmen die unterschiedlichen Höhen im Gefällebereich sauber auf und reduzieren aufwendige keilförmige Zuschnitte. Gleichzeitig ermöglichen sie eine sichere Integration der Glasscheibe und sorgen für einen technisch wie optisch sauberen Abschluss der Duschfläche.

Unterhalb der Fliesen schützt BLANKE DISK die Wand- und Bodenflächen vor eindringender Feuchtigkeit. Das selbstklebende Verbundabdichtungssystem spart Zeit im Bauablauf, da direkt mit dem Fliesen legen begonnen werden kann. In Bereichen mit elastischen Anschlussfugen ergänzt BLANKE DI-SECURE den Aufbau. Das Schnittschutzband schützt die dahinterliegende Abdichtung, wenn Silikonfugen bei späteren Wartungsarbeiten mit einem Messer entfernt werden. Damit wird bereits bei der Sanierung an den langfristigen Erhalt der Abdichtung gedacht.

Für zusätzlichen Komfort sorgt die elektrische Trockenbau-Flächenheizung BLANKE ELOTOP 1000. Aufgrund ihrer geringen Aufbauhöhe eignet sie sich besonders für Sanierungen, bei denen vorhandene Bodenhöhen berücksichtigt werden müssen. Die Wärme wird gleichmäßig über die Fliesenfläche abgegeben, während der bisherige Heizkörper entfallen konnte. So bleibt mehr Platz für die neue Raumgestaltung und der temperierte Boden erhöht den Komfort im Badezimmer.

Bei der Verlegung der großformatigen Fliesen kam außerdem das Nivelliersystem LEVITO SPIN zum Einsatz. Es unterstützt eine gleichmäßige Ausrichtung der Fliesen und hilft, störende Höhenunterschiede zwischen benachbarten Platten zu vermeiden. Sichtbare Fliesenkanten wurden mit BLANKE FLIESEN-ABSCHLUSSSCHIENEN aus Edelstahl geschützt und sauber eingefasst.

Das Referenzobjekt zeigt, wie sich ein kleines Bestandsbad durch eine neue Raumaufteilung und aufeinander abgestimmte Systemlösungen grundlegend verändern lässt. Die verwendeten Produkte unterstützen dabei nicht nur die Gestaltung, sondern erleichtern auch die Verarbeitung, verkürzen einzelne Arbeitsschritte und schaffen die Grundlage für eine dauerhaft sichere und komfortable Badlösung.

Processor
Klingele Fliesen, Stegen
Read more about this reference object

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessories

BLANKE DIBA FLEX-LINE
DRAINAGE UNIT WITH SIPHON, DN 40
Height: 56mm | Selection: Front/rear execution
The BLANKE DIBA FLEX-LINE is a customizable drainage line with a DN 40 outlet, available in front/back configurations. This drainage unit offers an impressive flow rate despite its low installation height. The drain body is available in various configurations, allowing for connections to the front/back or left/right. This flexibility enables the drain body to be easily adapted to the building's drainage system. The factory-installed BLANKE DIBA waterproofing provides high safety and prevents moisture damage. The flexible and easy installation ensures maximum security for tile setters in waterproofing details. The removable siphon also allows for easy and straightforward cleaning. The separately available BLANKE FLEX-LINE COVERS with design inserts are installed with the tile layout and adjusted to the tile thickness. The appearance of the drain can be precisely adapted to the dimensions of the shower area by trimming the cover. The BLANKE FLEX-LINE can thus be individually adapted to any challenge or construction site situation.

 
BLANKE DIBA-LINE 2.0
Linear Drainage, Stainless Steel
Height: 54 mm | Length: 60 cm
The thin-layer drainage line BLANKE DIBA-LINE 2.0 is ideal for creating a barrier-free shower area. BLANKE DIBA-LINE 2.0 is a stainless steel drainage channel with a factory-applied BLANKE DIBA waterproofing flange. With a very low installation height of 54 mm and a length of 0.6 m, this linear drainage system is particularly suitable for low construction heights. The integrated connection socket (DN 40) for accommodating drainage pipes with a socket system is also made of stainless steel. The BLANKE DIBA-LINE 2.0 linear drainage system, featuring a secondary drainage level and a drainage capacity of 37 l/min (0.61 l/s), is a component of the BLANKE DIBA waterproofing system.

 
BLANKE AQUA-KEIL GLASS
Brushed Stainless Steel, left
Height: 34 mm | Length: 98 cm | Selection: Left stop | Surface: Brushed
The BLANKE AQUA-KEIL GLAS made of natural stainless steel belongs to the slope and shower profiles. The profile allows for the accommodation of glass partitions (e.g., at linear drains) and thus the formation of a sloped edge for an aesthetically pleasing design of flush showers. The sloped edge is available in both right and left configurations; in this case, a left attachment is present. The perfect complement to the BLANKE AQUA-KEIL, and already included, is the BLANKE DIBA-KEIL or BLANKE DISK-KEIL fitting for reliable sealing of the screed transition to the rising wall. The profile for the glass holder has a height of 34mm and a length of 0.98m.

 
BLANKE AQUA-GLASS
Brushed Stainless Steel
Height: 8 mm | Length: 250 cm | Surface: Brushed
The BLANKE AQUA-GLAS made of stainless steel in a brushed natural finish belongs to the gradient and shower profiles. The profile serves as a glass holder and enables simple and aesthetic installation of glass walls on walls and floors without drilling or cutting tiles. Compared to conventional methods, it ensures non-destructive and waterproof anchoring. The BLANKE AQUA-GLAS is suitable for a tile thickness of 8mm and has a length of 2.5m. The glass holding profile is perfectly compatible with the BLANKE AQUA-KEIL and BLANKE AQUA-DEKO products from the Blanke drainage systems series.

 
More variants available
BLANKE DISK FLEX-LINE
DRAINAGE UNIT WITH SIPHON, DN 40
Height: 56mm | Selection: Front/rear execution
The BLANKE DISK FLEX-LINE is a customizable drainage line with a DN 40 outlet, available in front/back configurations. This drainage unit offers an impressive flow rate despite its low installation height. The drain body is available in various configurations, allowing for connections to the front/back or left/right. This flexibility enables the drain body to be easily adapted to the building's drainage system. The factory-installed self-adhesive BLANKE DISK waterproofing provides high safety and prevents moisture damage. The flexible and simple installation ensures maximum security for tile setters in waterproofing details, with easy sealing in just a few steps. The removable siphon also allows for easy and straightforward cleaning. The separately available BLANKE FLEX-LINE COVERS with design inserts are installed with the tile layout and adjusted to the tile thickness. The appearance of the drain can be precisely adapted to the dimensions of the shower area by trimming the cover. The BLANKE FLEX-LINE can thus be individually adapted to any challenge or construction site situation

 
BLANKE DISK-LINE
Linear Drainage, Stainless Steel
Height: 54 mm | Length: 60 cm
The thin-layer drainage line BLANKE DISK-LINE is perfectly suited for creating a barrier-free shower area. The BLANKE DISK-LINE is a stainless steel drainage channel with a factory-applied BLANKE DISK sealing flange. With a very low installation height of 54mm and a length of 0.6m, the linear drainage system is particularly suitable for low construction heights. The integrated connection socket (DN 40) for receiving pipes with a socket system is also made of stainless steel. The BLANKE DISK-LINE linear drainage with a secondary drainage level and a drainage capacity of 37 l/min (0.61 l/s) is a component of the self-adhesive BLANKE DISK sealing system.

 
BLANKE AQUA-KEIL
Brushed Stainless Steel, left
Height: 8/24 mm | Length: 98 cm | Selection: Left stop | Surface: Brushed
For the perfect detail solution on sloping surfaces to connect with flooring with linear drainage: the BLANKE AQUA-KEIL. The stainless steel gradient edge profile is available as a left or right version.

 
More variants available
BLANKE AQUA-DEKO
Brushed Stainless Steel
Height: 24 mm | Length: 125 cm | Surface: Brushed
BLANKE AQUA-DEKO is the elegant finish above the channel when creating floor-level showers. Further tile cutting is avoided, and the shower has an entirely pleasing and uniform look.